Yealink SIP-T38G - Page 256

Appendix
243
If ―local_time.dst_time_type‖ is set to 1 (By
Week), use the mapping:
Month: 1=Jan, 2=Feb,…, 12=Dec
Week of Month: 1=the first week in a month,…,
5=the last week in a month
Day of Week: 1=Mon, 2=Tues,…, 7=Sun
Hour of Day: 0=1am, 1=2am,…, 23=12pm
Note: It works only if the parameter
―local_time.summer_time‖ is set to 1
(Enabled).
Format
The value formats are:
 MM/DD/HH (For By Date)
 Month/Week of Month/Day of Week/Hour of
Day (For By Week)
Default Value
12/31/23
Range
1to 12/1 to 31/0 to 23 (For By Date)
1 to 12/1 to 5/1 to 7/0 to 23 (For By Week)
Example
local_time.end_time = 10/25/22
Parameter-
local_time.offset_time
Configuration File
<y0000000000xx>.cfg
Description
Sets the offset time (in minutes) of DST.
Note: It works only if the parameter
―local_time.summer_time‖ is set to 1
(Enabled).
Format
Integer
Default Value
60
Range
Not Applicable
Example
local_time.offset_time = 120
Time Format
Parameter-
local_time.time_format
Configuration File
<y0000000000xx>.cfg
Description
Sets the time format.
If set to 0 (12 Hour), the time display uses 12
hour format.
If set to 1 (24 Hour), the time display uses 24