Yealink SIP-T38G - Page 311

Administrator’s Guide for SIP-T3xG IP Phones
298
Parameter-
account.x.nat.stun_port
Configuration File
<MAC>.cfg
Description
Specifies the port of the STUN server.
X ranges from 1 to 6.
Format
Integer
Default Value
3478
Range
Not Applicable
Example
account.1.nat.stun_port = 3479
Parameter-
network.802_1x.mode
Configuration File
<y0000000000xx>.cfg
Description
Specifies the types of the 802.1X
authentication to use on the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
0-Disabled
1-EAP-MD5
Example
network.802_1x.mode = 1
Parameter-
network.802_1x.identity
Configuration File
<y0000000000xx>.cfg
Description
Enters the identity used for authenticating
the IP phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.identity = admin