21 Other Features
Self-Test (Selftest)
You can test the keyboard and memory operations.
Test Type (Type)
You can perform the following tests.
Key Test (Key Board)
Tests whether the front-panel keys are operating properly. If the name of the key that you press is highlighted,
the key is operating properly.
Memory Test (Memory)
You can test the internal memory to determine whether it is functioning normally. If it is functioning normally, “Pass”
appears. If an error occurs, “Error” appears.
SD Memory Card Test (SD CARD)
You can test an SD memory card to determine whether it is functioning normally. If an error occurs, “Error”
appears.
Hard Disk Test (HDD)
You can test an internal or external hard drive to determine whether it is functioning normally. If an error occurs,
“Error” appears.
Printer Test (Printer)
Tests whether the optional built-in printer is operating properly. If the print density is correct, the built-in printer is
operating properly. If an error occurs, the built-in printer does not print properly.
Executing a Test (Test Exec)
The selected self-test starts.
If an Error Occurs during a Self-Test
If an error occurs even after you carry out the following procedure, contact your nearest YOKOGAWA dealer.
• Execute the self-test again several times.
• Check whether the media being tested is properly inserted.
•
Check that the paper is set properly in the built-in printer and that paper is not jammed.
To Next Page
Loading...
Need help?
General
