69
IM 01B08B02-01EN
List of Parameters
List of Parameters
P&T Register Display (P&T REG 1/3)
Parameter Name Setting and Display Range Unit
Factory Default Value
Display and Setting Conditions
for Controller Mode
User
Set-
tings
YS1500
(SINGLE)
YS1700
(PROG)
SINGLE
CAS
SELECT
PROG
P01 Variable parameter 1
Internal value (User program) = Maximum and Minimum value which can be
expressed by floating point numbers.
Setting and display range = -99999 to 99999
When this range is exceeded, ´*´ is displayed.
The scale and decimal point position for each P register are set by YSS1000.
Factory default settings for scale and decimal point position
Scale high limit: 1000 (100.0 on the display)
Scale low limit: 00 (0.0 on the display)
Decimal point position: 1
0.0 N/A N/A N/A R/W
P02 Variable parameter 2 0.0 N/A N/A N/A R/W
P03 Variable parameter 3 0.0 N/A N/A N/A R/W
P04 Variable parameter 4 0.0 N/A N/A N/A R/W
P05 Variable parameter 5 0.0 N/A N/A N/A R/W
P06 Variable parameter 6 0.0 N/A N/A N/A R/W
P07 Variable parameter 7 0.0 N/A N/A N/A R/W
P08 Variable parameter 8 0.0 N/A N/A N/A R/W
P09 Variable parameter 9 0.0 N/A N/A N/A R/W
P10 Variable parameter 10 0.0 N/A N/A N/A R/W
P11 Variable parameter 11 0.0 N/A N/A N/A R/W
P12 Variable parameter 12 0.0 N/A N/A N/A R/W
P13 Variable parameter 13 0.0 N/A N/A N/A R/W
P14 Variable parameter 14 0.0 N/A N/A N/A R/W
P15 Variable parameter 15 0.0 N/A N/A N/A R/W
P16 Variable parameter 16 0.0 N/A N/A N/A R/W
P17 Variable parameter 17 0.0 N/A N/A N/A R/W
P18 Variable parameter 18 0.0 N/A N/A N/A R/W
P19 Variable parameter 19 0.0 N/A N/A N/A R/W
P20 Variable parameter 20 0.0 N/A N/A N/A R/W
P21 Variable parameter 21 0.0 N/A N/A N/A R/W
P22 Variable parameter 22 0.0 N/A N/A N/A R/W
P23 Variable parameter 23 0.0 N/A N/A N/A R/W
P24 Variable parameter 24 0.0 N/A N/A N/A R/W
P25 Variable parameter 25 0.0 N/A N/A N/A R/W
P26 Variable parameter 26 0.0 N/A N/A N/A R/W
P27 Variable parameter 27 0.0 N/A N/A N/A R/W
P28 Variable parameter 28 0.0 N/A N/A N/A R/W
P29 Variable parameter 29 0.0 N/A N/A N/A R/W
P30 Variable parameter 30 0.0 N/A N/A N/A R/W
To Next Page
Loading...
Need help?
General
