YUNEEC H520 - Return to Home Settings

Yuneec Electric Aviation
H520 Start Guide
51
 Warning – Provides an audible warning when the
Geofence is breached.
 None – No actions are taken when the Geofence is
breached.
 Return to Launch – Return the H520 to the launch point
following a Geofence breach.
 Loiter – Causes the H520 to loiter/hover in place
following a Geofence breach. The pilot may manually
continue flight after moving beneath/away from the
Geofence breach area.
Warning and Loiter are the most common settings for this function. Consult the local requirements or
aviation agency to determine if there is a required action on GeoFence breach.
Max Radius
Sets the maximum radius of the geofence relative to the launch position.
Max Altitude
Sets the maximum altitude of the geofence relative to the launch altitude.
R ETURN TO H OME S ETTINGS
Using the Return to Home settings menu, the Pilot can set the altitude of the H520 upon executing a
RTL. This setting is useful for avoiding any trees or obstacles on the return path to home. Ensure this
setting is checked at any new area being surveyed/flown.