YUNEEC H520 - Mission End; Planned Home Position

Yuneec Electric Aviation
H520 Start Guide
57
MISSION END
 Return to Launch – Automatic RTL on mission end.
P
LANNED HOME POSITION
 Altitude – Sets the home position altitude in Mean Sea Level
(MSL). Upon connection to an aircraft, this value will adjust to the
actual aircraft altitude.
 Set Home To Map Center – Sets the planned home position to the
current center of the map display. The home position will be reset
to the aircraft position at takeoff.
TAKEOFF WAYPOINT
First waypoint placed in Waypoint mode. Takeoff waypoint will navigate the H520 to the specified takeoff
point, then head to the first mission waypoint. NOTE: It is highly encouraged to place the takeoff waypoint
near the launch/land site.
 Altitude – Sets the desired takeoff altitude. Be certain the area is clear of trees, powerlines, power
poles, or other vertical obstacles that may interfere with clear waypoint or survey flights.