21
Figure 12 Push microSD Card into the SD Card Slot
11.Replace the access Door.
12.Secure the access door using the two screws.
Figure 13 Secure Access Door
13.Replace the hand strap, if required.
14.Press and hold the Power button to turn on the device.
Resetting the TC20
There are four reset functions:
• Soft reset
• Hard reset
• Enterprise reset. See Performing an Enterprise Reset on page 140.
• Factory reset See Performing a Factory Reset on page 142.
Performing a Soft Reset
Perform a soft reset if applications stop responding.
1. Press and hold the Power button until the menu appears.
2. Touch Reset.
3. The device reboots.
To Next Page
Loading...