To Next Page

To Previous Page

DataWedge

• Basic data formatting - Allows the configuration of any data formatting for the related Output Plug-in.

When the plug-in is disabled, any data is passed on without modification.

• Enabled - Enables or disables Basic Data Formatting. A check in the checkbox indicates that it is

enabled (default - enabled).

• Prefix to data - Add characters to the beginning of the data when sent.

• Suffix to data - Add characters to the end of the data when sent.

• Send data - Set to transfer the captured data to the foreground application. Disabling this option

prevents the actual data from being transmitted. However, the prefix and suffix strings, if present, are

still transmitted even when this option is disabled (default - enabled).

• Send as hex - Set to send the data in hexadecimal format. A check in the checkbox indicates that the

plug-in is enabled (default - disabled).

• Send TAB key - Set to append a tab character to the end of the processed data. A check in the

checkbox indicates that the plug-in is enabled (default - disabled).

• Send ENTER key - Set to append an Enter character to the end of the processed data. A check in the

checkbox indicates that the plug-in is enabled (default - disabled).

Intent Output

Allows configuration of the Intent Output Plug-in for the profile. The Intent Output Plug-in allows the captured

data to be sent to an application in the form of an implicit Intent. Refer to the Android Developer web site for

more information, developer.android.com

• Enabled - Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled

(default - disabled).

• Intent action - Enter the Intent Action name (required).

• Intent category - Enter the Intent Category name (required).

• Intent delivery - Select the method by which the intent is delivered:

• Send via StartActivity

• Send via startService (default)

• Broadcast intent

• Receiver foreground flag - Set Broadcast intent flag in Intent delivery. (DS3678).

• Advanced data formatting - is a way to customizing data before transmission. Use advanced data

formatting (ADF) to edit scan data to suit requirements.

• Enable - Enables or disables ADF. A check in the checkbox indicates that ADF is enabled (default -

disabled).

• Rules - ADF uses rules to customize data. These rules perform detailed actions when the data meets

certain criteria. One rule may consist of single or multiple criteria applied to single or multiple actions.

See Generating Advanced Data Formatting Rules for more information.

Zebra TC20 User Manual

Questions and Answers: