To Next Page

To Previous Page

DataWedge

• Basic data formatting - Allows configuration of any data formatting for the related Output Plug-in. When

the plug-in is disabled any data is passed on without modification.

• Enabled - Enables or disables Basic Data Formatting. A check in the checkbox indicates that it is

enabled (default - enabled).

• Prefix to data - Add characters to the beginning of the data when sent.

• Suffix to data - Add characters to the end of the data when sent.

• Send data - Set to transfer the captured data to the foreground application. Disabling this option

prevents the actual data from being transmitted. However, the prefix and suffix strings, if present, are

still transmitted even when this option is disabled (default - enabled).

• Send as hex - Set to send the data in hexadecimal format. A check in the checkbox indicates that the

plug-in is enabled (default - disabled).

• Send TAB key - Set to append a tab character to the end of the processed data. A check in the

checkbox indicates that the plug-in is enabled (default - disabled).

• Send ENTER key - Set to append an Enter character to the end of the processed data. A check in the

checkbox indicates that the plug-in is enabled (default - disabled).

Usage

This section provides information on how to configure IP Output using the DataWedge configuration user

interface. To use IP Output in a particular DataWedge profile (for example: Profile0), scroll downward on IP

Output.

Figure 62 IP Output Screen

Using IP Output with IPWedge

IPWedge is a computer application that can be easily configured to retrieve data sent over network by

DataWedge IP Output. Refer to the IPWedge User Manual on how to install and configure in a host computer.

To enable IP Output to send captured data to a remote computer that is installed with IPWedge:

1. In IP Output, touch Enabled.

A check appears in the checkbox.

Zebra TC20 User Manual

Questions and Answers: