EasyManuals Logo
Home>Zebra>PDA>TC20

Zebra TC20 User Manual

Zebra TC20
171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Accessories
37
Figure 32 Battery Charging
2. Ensure the device is seated properly.
Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device. See Table 2
on page 19 for device charging status. The internal battery charges from fully depleted to 90% in approximately
four hours and from fully depleted to 100% in approximately five hours.
NOTE: In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for approximately
10 hours of use.
Use only Zebra charging accessories and batteries. Charge batteries at room temperature with the TC20 in sleep mode.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F))
the device or cradle may for small periods of time alternately enable and disable battery charging to keep the
battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.
Charge/Notification
LED

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC20 and is the answer not in the manual?

Zebra TC20 Specifications

General IconGeneral
BrandZebra
ModelTC20
CategoryPDA
LanguageEnglish

Related product manuals