48
USB Communication
Introduction
Connect the TC20 to a host computer using the USB-C Cable, or the 1-Slot Ethernet Cradle with a standard
USB B cable to transfer files between the TC20 and the host computer. See Accessories for more information.
When connecting the TC20 to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files.
Transferring Files
note Use Transfer files to copy files between the device (internal memory or microSD card) and the host computer.
1. Connect a USB cable to the device or place the device into a USB cradle.
2. Pull down the Notification panel and touch USB charging this device.
By default, Charge this device is selected.
Figure 49 Use USB to Dialog Box
3. Touch Transfer files.
4. On the host computer, open a file explorer application.
5. Locate the device as a portable device.
6. Open the SD card or the Internal storage folder.
7. Copy files to and from the device or delete files as required.
To Next Page
Loading...