49
Transferring Photos
To transfer photos using Photo Transfer Protocol:
note
Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to the host
computer.
1. Connect USB cable to the device or place the device into a USB cradle. See Accessories on page 23 for
setup information.
2. Pull down the Notification panel and touch USB charging this device.
3. Touch Transfer photos (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
6. Copy or delete photos as required.
Disconnect from the Host Computer
To disconnect the device from the host computer:
caution
Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB devices
correctly to avoid losing information.
1. On the host computer, unmount the device.
2. Remove the USB from the device or remove the device from the cradle.
To Next Page
Loading...
Need help?
General
