Settings
136
To open the configuration screen, from the RxLogger home screen touch Settings.
Figure 6 RxLogger Configuration Screen
ANR Module
Application Not Responsive (ANR) indicates that a running application’s UI thread is not responding for a
specified time period. RxLogger is able to detect this condition and trigger a copy of the call stack trace of the
unresponsive application into the log directory. The event is also indicated in the high level CSV log.
• Enable Module - Enables logging for this module.
• Log path - Specifies the default log path to store the ANR log files.
• Collect Historic ANRs - Collects ANR trace files from the system.
Kernal Module
The Kernel Module captures kmsg from the system.
• Enable Module - Enables logging for this kernal module.
• Log path - Specifies the high level log path for storage of all kernal logs. This setting applies globally to all
kernal buffers.
• Kernal Log filename - Specifies the base log filename for this kernal buffer. The current file count is
appended to this name.
• Max Kernal log file size - Specifies the maximum size, in megabytes, of an individual log file.
• Kernal Log interval - Sets the interval, in seconds, on which to flush the log buffer to the file.
• Kernal Log file count - Specifies the number of log files to keep and rotate through. Each log file is subject
to the max log size option.
• Enable System Timestamp in Kernal Log - Enables system timestamps in kernal logs.
• System Timestamp Interval - Sets the interval, in seconds, between system timestamps.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
