15
Getting Started
Introduction
This chapter describes the features of the TC8300 and explains how to install and charge the battery and how
to reset the TC8300.
Unpacking
Carefully remove all protective material from the TC8300 and save the shipping container for later storage and
shipping.
Verify that box contains all the equipment listed below:
• TC8300
• Battery
• Regulatory Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact Support immediately. See Service Information on page 14 for contact information.
Removing the Screen Protection Film
A screen protection film is applied to the TC8300 screen to protect the screen during shipping. To remove the
screen protector, carefully lift the thin film off the display.
To Next Page
Loading...
