Zebra TC8300 - Select Scanner to Set Parameters; Decoders

DataWedge
84
• Decoder params
• UPC/EAN params
• Reader params
• Scan params
• UDI params
• Multibarcode params
• Keep enabled on suspend
Select Scanner to Set Parameters
Select a scanner from the available options to set the parameters for or select All Scanners.
Decoders
Configures which barcode decoders are enabled or disabled. For best performance disable all unnecessary
decoders.
Touch Decoders. The Barcode input screen appears. A check in the checkbox indicates that the decoder is
enabled. By default the most commonly used decoders are enabled (shown below with an asterisk). The
supported decoders are:
NOTE: DataWedge supports the decoders listed below but not all are validated on this device.