EasyManua.ls Logo

Zebra TC8300 - Page 28

Zebra TC8300
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
28
4-Slot Battery Charger SAC-TC8X-4SCHG-01 Charges up to four spare batteries. Requires power
supply, p/n PWR-BGA12V50W0WW and country
specific grounded AC line cord.
USB and Charging Cable CBL-TC8X-USBCHG-01 Provides USB communication and power to the device.
Requires power supply PWR-BUA5V16W0WW and
country specific un-grounded AC line cord.
Audio Accessories
Quick Disconnect Audio
Cable
CBL-TC8X-AUDQD-01 Snaps onto the device and provides audio to a wired
headset with Quick Disconnect connector.
3.5 mm Audio Cable CBL-TC8X-AUDBJ-01 Snaps onto the device and provides audio to a wired
headset with 3.5 mm plug.
Mounting Brackets
2-Slot Cradle Desktop
Stand
BRKT-SCRD-SSDK-01 Use for mounting a 2-Slot cradle on a desk.
5-Slot Cradle Desktop
Stand
BRKT-SCRD-MSDK-01 Use for mounting a 5-Slot cradle on a desk or rack.
Rack Mount Bracket BRKT-SCRD-SMRK-01 Use for mounting a 5-Slot cradle or four 4-Slot Battery
Chargers on a rack.
Desktop Stand MNT-TC8X-DKPH-01 Un-powered desktop presentation stand. Allows to use
the device on a flat surface (i.e. desktop) for hands-free
scanning.
Cart Mount MNT-TC8X-CMKT-01 Un-powered cart mount. Allows to use the device on
carts with up to 2” diameter rail/bar and allows to use
the device on hands-free scanning mode. Includes
RAM Mount required for installation.
Forklift Mount MNT-TC8X-FMKT-01 Un-powered forklift mount. Allows to install the device
on a roll bar or square surface of a forklift and allows to
use the device on landscape or portrait mode.
Carrying Solutions
Hand Strap SG-TC8X-HDSTP-01 Replacement hand strap.
Wrist Lanyard 50-12500-006 Optional lanyard for holding the device.
Quick Draw Soft Holster SG-TC8X-QDHLST-01 Use to hold the device. Requires the Universal Belt.
Presentation Soft Holster SG-TC8X-PMHLST-01 Use to hold the device and for hands-free scanning.
Requires the Universal Shoulder Strap or Universal
Belt.
Universal Belt 11-08062-02R Use to hold the Quick Draw Soft Holster or the
Presentation Soft Holster.
Universal Shoulder Strap WA6010 Use to hold the Presentation Soft Holster.
Power Supplies
Power Supply PWR-BUA5V16W0WW Provides power to the device using the USB and
Charging Cable. Requires country specific
un-grounded AC line cord.
Table 4 Accessories (Continued)
Accessory Part Number Description

Table of Contents

Other manuals for Zebra TC8300

Related product manuals