Zebra TC8300 - Device Sensors and Waking

Accessories
37
Figure 22 5-Slot Ethernet Cradle (Shown on Optional Desk Mount)
To setup the 5-Slot Ethernet cradle:
Figure 23 5-Slot Ethernet Cradle with Battery Charger Setup (Shown on Optional Desk Mount)
1. Connect the DC line cord to power supply.
2. Connect DC line cord to power input on cradle.
3. Connect Ethernet cable to Ethernet port 1 on cradle.
4. Connect other end of Ethernet cable to router port.
5. Connect the AC line cord to the power supply.
100/10 LED
1000 LED
DC Line Cord
Power Supply
AC Line Cord
Router
Ethernet Cable
Primary Port