8/23/12 P1051584-002
Glossary
alphanumeric Indicating letters, numerals, and characters such as punctuation marks.
backfeed When the print engine pulls the media and ribbon (if used) backward into the print
engine so that the beginning of the label to be printed is properly positioned behind the
printhead. Backfeed occurs when operating the print engine in Tear-Off and Applicator modes.
bar code A code by which alphanumeric characters can be represented by a series of
adjacent stripes of different widths. Many different code schemes exist, such as the universal
product code (UPC) or Code 39.
black mark A registration mark found on the underside of the print media that acts as a start-
of-label indication for the print engine. (See
non-continuous media.)
calibration (of a print engine) A process in which the print engine determines some basic
information needed to print accurately with a particular media and ribbon combination. To do
this, the print engine feeds some media and ribbon (if used) through the print engine and
senses whether to use the direct thermal or thermal transfer print method, and (if using
non-continuous media) the length of individual labels or tags.
configuration The print engine configuration is a group of operating parameters specific to
the print engine application. Some parameters are user selectable, while others are dependent
on the installed options and mode of operation. Parameters may be switch selectable, control
panel programmable, or downloaded as ZPL II commands. A configuration label listing all the
current print engine parameters may be printed for reference.
continuous media Label or tag-stock media that has no notch, gap, or web (media liner
only) to separate the labels or tags. The media is one long piece of material.
core diameter The inside diameter of the cardboard core at the center of a roll of media or
ribbon.
diagnostics Information about which print engine functions are not working that is used for
troubleshooting print engine problems.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
