115
Routine Maintenance
Replacing Print Engine Components
8/23/12 P1051584-002
Replacing Print Engine Components
Some print engine components, such as the printhead and platen roller, may wear out over time
and can be replaced easily. Regular cleaning may extend the life of some of these components.
See
Cleaning Schedule on page 112 for the recommended cleaning intervals.
Ordering Replacement Parts
For optimal printing quality and proper printer performance across our product line, Zebra
strongly recommends the use of genuine Zebra™ supplies as part of the total solution.
Specifically, the ZE500 print engines are designed to work only with genuine Zebra™
printheads, thus maximizing safety and print quality.
Contact your authorized Zebra reseller for part ordering information, or see Contacts
on page 11 for contact addresses and telephone numbers.
Recycling Print Engine Components
Lubrication
No lubrication is needed for this print engine.
The majority of this print engine’s components are recyclable. The print engine’s main logic
board may include a battery that you should dispose of properly.
Do not dispose of any print engine components in unsorted municipal waste. Please dispose
of the battery according to your local regulations, and recycle the other print engine
components according to your local standards. For more information, see
http://www.zebra.com/environment.
Caution • Some commercially available lubricants will damage the finish and the
mechanical parts if used on this print engine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
