Zebra ZE500 - Changing Printer Settings

Printer Configuration and Adjustment
Changing Printer Settings
72
P1051584-002 8/23/12
Changing Printer Settings
This section presents the printer settings that you can change and identifies the tools for
changing them. These tools include the following:
• ZPL and Set/Get/Do (SGD) commands (See the Zebra
®
Programming Guide for more
information.)
• The printer’s control panel display (See Control Panel Display on page 17 for more
information.)
• The printer’s web pages when the printer has an active wired or wireless print server
connection (See the ZebraNet Wired and Wireless Print Servers User Guide for more
information.)
Copies of the referenced manuals are available at http://www.zebra.com/manuals or on the
user CD that came with your print engine.
This section contains the following subsections:
• Print Settings on page 73
• Maintenance and Diagnostic Tools on page 82
• Network Settings on page 89
• Language Settings on page 93
• Port Settings on page 96