39
Printer Setup and Operation
Types of Media
8/23/12 P1051584-002
Types of Media
Your print engine can use various types of media:
• Standard media—Most standard media uses an adhesive backing that sticks individual
labels or a continuous length of labels to a liner. Standard media can come on rolls or in a
fanfold stack (
Table 3).
• Tag stock—Tags are usually made from a heavy paper. Tag stock does not have adhesive
or a liner, and it is typically perforated between tags. Tag stock can come on rolls or in a
fanfold stack (
Table 3).
Important • Zebra strongly recommends the use of Zebra-brand supplies for continuous
high-quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has
been specifically engineered to enhance the printing capabilities of the print engine and to
prevent premature printhead wear. To purchase supplies, go to
http://www.zebra.com/howtobuy.
Table 3 • Roll and Fanfold Media
Media Type How It Looks Description
Non-Continuous
Roll
Media
Roll media is wound on a 3-in. (76-mm) core. Individual
labels or tags are separated by one or more of the following
methods:
• Web media separates labels by gaps, holes, or notches.
• Black mark media uses pre-printed black marks on the
back side of the media to indicate label separations.
• Perforated media has perforations that allow the labels or
tags to be separated from each other easily. The media may
also have black marks or other separations between labels
or tags.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
