Device overview S88 / OPMI Lumera T
Version 8.0
Page 124 G-30-1682-en
OPMI Lumera T with integrated assistant's microscope on
the S88 floor stand
Properties
OPMI Lumera T has been designed for the magnified visualization of the field
of view during surgical procedures in ophthalmology. The system is intended
for use in offices, hospitals or other human medicine institutions.
The installation conditions and the use of the system must meet microsurgical
requirements:
–Low vibration
– Clean environment
– Avoidance of extreme mechanical stress
Set-up
OPMI Lumera T comprises the surgical microscope with the integrated
assistant's microscope, the X-Y coupling and the suspension system.
The suspension system is used to power and control the motorized functions
of the surgical microscope. Its hallmarks are its superb mobility and easy
operation. Four steerable casters on the stand base permit easy positioning in
the OR. The motorized functions of the surgical microscope can be activated
using a foot control panel.
1 Surgical microscope with integrated assistant's microscope
2 X-Y coupling
3 Floor stand S88
To Next Page
Loading...
