Zeiss S88 - Labels on the Control Panel of the Suspension Systems

Safety measures S88 / OPMI Lumera T
Version 8.0
Page 52 G-30-1682-en
Labels on the control panel of the suspension systems
1 "Light source 1" label
2 "Key" label
Every time you press the "∇" key, the displayed value is decremented in
predefined steps down to a certain minimum.
3 "Key" label
Every time you press the "Δ" key, the displayed value is incremented in
predefined steps up to a certain maximum.
4 "Selector switch" label
The selector switch allows you to switch the light source on and off and
to switch between different configurations of the foot control panel.
– The light source is off.
– The light source is on.
– The light source can be switched on/off via the left-hand side of the
foot control panel.
– The light source can be switched on/off via the right-hand side of the
foot control panel.
5 "Button assignment" label
Indicates the functions of the "Mode", "Store" and "Manual" keys
6 "Light source 2" label
1
MODE STORE MANUAL
2