Safety measures S88 / OPMI Lumera T
Version 8.0
Page 36 G-30-1682-en
Symbols and labels on the device
Labels on the microscope
1 "OPMI Lumera T" device label
The device label contains the following information:
2 "Focusing range indication" label
If the dot is located between the two arrow tips, the focusing system of
the surgical microscope is in its initial position.
3 "Invertertube for main microscope" label
The indicating label contains the following information:
4 "DoF - Depth of Field" label
This label identifies the button for the depth of field management system.
5 "Manual zoom adjustment" label
This label identifies the two directions of rotation for increasing or
reducing the zoom. Turn the knob only when the device is in manual
mode.
CAUTION Please comply with the warning labels and notices!
• If you notice that any label is missing on your device or has become
illegible, please contact us or one of our authorized representatives.
We will provide you with replacements.
– Manufacturer (company name) –Order no.
–Device name – Serial number
– Manufacturer (company name) – Device name
–Focal length – Warning symbol
To Next Page