Device overview S88 / OPMI Lumera T
Version 8.0
Page 58 G-30-1682-en
Description of components
The Lumera T surgical microscope comprises the following components:
1 X-Y coupling
The X-Y coupling allows motorized fine positioning of the surgical
microscope in a horizontal plane. The adjustment range is 40 mm x 40 mm.
The speed of travel can be set on the control panel of the suspension
system.
The X-Y coupling is provided with a center infeed. When you press the
reset button (2) or an appropriately programmed button of the foot
control panel (4),
– the X-Y coupling adopts its center position,
– the focusing system of the surgical microscope is reset to its initial
position (3).
4
To Next Page