Safety measures S88 / OPMI Lumera T
Version 8.0
Page 38 G-30-1682-en
6 "XY reset button" label
This label identifies the button for resetting the X-Y coupling and the
focusing system to their initial positions.
7 Device name
This imprint identifies the device.
8 "Light guide connector" indicating label
This label shows how to correctly connect the light guide.
9 It indicates a potential risk posed by the assistant's microscope.
Tighten the screw firmly to ensure a secure connection of the assistant's
microscope with the main microscope.
Refer to the instructions for use. (See page 158).
10 "Invertertube for assistant's microscope" label
The indicating label contains the following information:
11 "OPMI Lumera T with assistant's microscope" label
The device label contains the following information:
– Manufacturer
(company name)
– Device name
–Focal length – information label
– Manufacturer
(company name)
–Order no.
–Device name –Serial number
OPMI Lumera T
To Next Page