ZKTeco ProCapture-T - Password Verification

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
3
Input the user ID and press
Press
button to choose
“Fingerprint” and press
. Press
finger onto the sensor afterwards
Verification succeeds
Verification succeeds Verification fails
Remarks:
1. Input user ID in the initial interface and press
button. If “Incorrect user ID!” is displayed, this means
the user ID does not exist.
2. When the device displays “please press your finger again”, press your finger again onto the
fingerprint sensor. If verification still fails after 2 attempts, it will exit to the initial interface.
1.2.3 Password Verification
Under this verification method, the entered password is verified with the password of the entered user ID.
Input the user ID and press
Choose “Password” and press
Input password
Verification succeeds Verification succeeds Verification fails
Remarks: If “Incorrect password” is displayed, please enter the password again. If verification still fails
after 2 attempts, it will exit to the initial interface.