12 ProCapture-T & PRoRF-T User Manual
5 User Role
Setting user rights of operating the menu (a maximum of 3 roles can be set). When user role is enabled,
in [User Mgt.] > [New User] > [User Role], you can allocate suitable user role to each user.
Role: Super user needs to allocate different rights to new users. To avoid setting rights for each user one
by one, you can set user roles to categorize different permission levels in user management.
5.1 Enabling User Role
In the initial interface, press
> User Role > User Defined Role 1 (2 / 3) > Enable Defined Role, Press
to enable defined role.
After enable defined roles, you can check the enabled user roles in [User Mgt.] > [New User] > [User
Role].
Remarks: At least one registered Administrator is required to enable user role, or, the device will
prompt “Please enroll super admin first”.
5.2 Rights Allocation
In the initial interface, press
> User Role > User Defined Role 1 (2 / 3) > Define User Role to enter
User Defined Role 1 (2 /3) rights allocating interface. Press
to select or cancel the operating right to
To Next Page
Loading...
Need help?
General
Weight and Dimensions
