26 ProCapture-T & PRoRF-T User Manual
8 Personalize Settings
8.1 User Interface Settings
In the initial interface, press
> Personalize > User Interface to set User Interface.
Wallpaper: Select the wallpaper of main screen as required, you can find wallpapers of various styles in
the device.
Language: Select the language of device as required.
Menu Screen Timeout (s): When there is no operation in the menu interface and the time exceeds the
set value, the device will automatically exit to the initial interface. You can disable it or set the value to
60~99999 seconds.
Remarks: If [Disabled] is chosen, the system will not exit the menu interface even when there is no
operation. Disabling this function is not recommended due to great power used and insecurity.
Idle Time to Slide Show (s): When there is no operation in the initial interface and the time exceeds the
set value, a slide show will be shown. It can be disabled (set to “None”) or set to 3~999 seconds.
Slide Show Interval (s): This refers to the interval between displaying different slide show pictures. It can
be disabled or set to 3~999 s.
Idle Time to Sleep (m): When there is no operation in the device and the set Sleep Time is attained, the
device will enter standby mode. Press any key or finger to cancel standby mode. You can disable this
function, or set the value to 1~999 minutes. If this function is turned to [Disabled], the device will not
enter standby mode.
Remarks: Disabling this function is not recommended due to great power used.
Main Screen Style: Choosing the position and ways of the clock and status key.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
