ZKTeco ProCapture-T User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
1
1 Guidance Notes
1.1 Method of Pressing Fingerprint
It is recommended to use the index finger, middle finger or ring finger; avoid using the thumb or
little finger.
1. Correct way to press the fingerprint:
2. Wrong ways to press the fingerprint:
Press the finger horizontally onto the fingerprint sensor; the center
of the fingerprint should be placed on that of the sensor.
Vertical
Sides
Slanted Too Low
Please use the correct method of pressing fingerprint for registration and
verification. Our company does not undertake the responsibility for the lowered
verification performance caused by user’s improper operation. The rights to final
interpretation and amendment are reserved.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm