Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
33
10 Access Control
Access Control option is used to set the Time Rule, Holidays, Combined Verification etc., the related
parameters for the device to control the lock and other devices.
In the initial interface, press
> Access Control to enter Access Control setting interface.
To gain access, the registered user must meet the following conditions:
1. User’s access time falls within either user’s personal time zone or group time zone.
2.
User’s group must be in the access combo (when there are other groups in the same access combo,
verification of members of those groups are also required to unlock the door).
In default settings, new users are allocated into the first access group with the default group time rule [1]
and access combo as “1”, and set in unlocking state.
10.1 Access Control Options Settings
In the initial interface, press
> Access Control > Access Control Options to enter the Access
Control Options setting interface.
Door Lock Delay (s): The period of time of unlocking (from door opening to closing automatically) after
the electronic lock receives an open signal sent from the device (value ranges from 1 to 10 seconds).
Door Sensor Delay (s): When the door is opened, the door sensor will be checked after a time period; if
To Next Page
Loading...
Need help?
General
Weight and Dimensions
