ZKTeco ProCapture-T User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
27
8.2 Voice Settings
In the initial interface, press
> Personalize > Voice to enter the Voice settings interface.
Voice Prompt: Select whether to enable voice prompts during operating. The default value is [ON],
indicating that voice prompt is enabled. You may press
to switch between [ON] and [OFF]. The icon
[OFF] indicates that voice prompt is disabled.
Keyboard Prompt: Select whether to enable voice while touch the keyboard. The default value is [ON],
indicating that keyboard prompt is enabled. You may press
to switch between [ON] and [OFF]. The
icon [OFF] indicating that keyboard prompt is disabled.
Volume: Set the prompt volume of device. The default value is 70. Press
key to increase the volume,
press
key to decrease the volume.
8.3 Bell Settings
Many companies choose to use bell to signify on-duty and off-duty time. When reaching the scheduled
time for bell, the device will play the selected ringtone automatically until the ringing duration is passed.
8.3.1 Adding New Bell
In the initial interface, press
> Personalize > Bell Schedules > New Bell Schedule to enter the New
Bell Schedule adding interface.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm