ZKTeco ProCapture-T User Manual

20 ProCapture-T & PRoRF-T User Manual
Wiegand Format: User can choose among the following built-in Wiegand formats: Wiegand 26,
Wiegand 26a, Wiegand 34, Wiegand 34a, Wiegand 36, Wiegand 36a, Wiegand 37, Wiegand 37a and
Wiegand 50. Multiple selections are available, but the actual Wiegand format will depend on the option
in [Wiegand output bits].
For Example: If the 26-bit Wiegand26, 34-bit Wiegand34a, 36-bit Wiegand36, 37-bit Wiegand37a and
50-bit Wiegand50 are chosen in [Wiegand Format], but 36 bits is selected in [Wiegand output bits],
then the actual Wiegand format for use will be 36-bit Wiegand36.
Wiegand output bits: Number of bits of Wiegand data. After choosing [Wiegand output bits], the
device will use the set number of bits to find the suitable Wiegand format in [Wiegand Format].
For Example: If the 26-bit Wiegand26, 34-bit Wiegand34a, 36-bit Wiegand36, 37-bit Wiegand37a and
50-bit Wiegand50 are chosen in [Wiegand Format], but 36 bits is selected in [Wiegand output bits],
then the actual Wiegand format for use will be 36-bit Wiegand36.
Failed ID:
It is defined as the output value of failed user verification. The output format depends on the
[Wiegand Format] setting. The default value ranges from 0 to 65535.
Site Code: It is similar to device ID except that it can be set manually and repeatable with different
devices. The default value ranges from 0 to 256.
Pulse Width (us):
The width of pulse sent by Wiegand card reader. The default value is 100 microseconds,
which can be adjusted within the range of 20 to 100 microseconds.
Pulse Interval (us): The default value is 1000 microseconds, which can be adjusted within the range of 200
to 20000 microseconds.
ID Type: Output content after successful verification. User ID or Badge Number can be chosen.
6.5.3 Card Format Detect Automatically
[Card Format Detect Automatically] aims at assisting user with quickly detecting the card type and its
corresponding format. Various card formats are preset in the device. After card swiping, the system will
detect it as different card numbers according to every format; user only requires to choose the item
equivalent to the actual card number, and set the format as the Wiegand format for the device. This
function is also applicable to card reading function and auxiliary Wiegand reader.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm