ZKTeco ProCapture-T User Manual

10 ProCapture-T & PRoRF-T User Manual
In the initial interface, press
> User Mgt. > All User to enter All User interface. Input “User ID” in ,
the corresponding user will be shown. As shown in the above figure, search for the user with the user ID
of “2”.
4.4 Editing User
After a user is chosen through 4.3 Searching User, press
and select [Edit] to enter user editing
interface.
Or in the initial interface press
> User Mgt. > All User > Search a user > Press > Edit to enter user
editing interface.
The operation method of editing user is the same with that of adding user, but the user ID cannot be
edited.
4.5 Deleting a User
After a user is chosen through 4.3 Searching User, press
and select [Delete] to enter user deleting

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm