46 ProCapture-T & PRoRF-T User Manual
13 Autotest
To automatically test whether all modules in the device function properly, which include the LCD, voice,
keyboard, fingerprint sensort, camera and RTC (Real-Time Clock).
In the initial interface, press
> Autotest to enter the Autotest interface.
Test All: To test LCD, voice, keyboard, fingerprint sensor, camera and RTC. During the test, press
to
continue to the next test, while press
to exit the test.
Test LCD: To test the display effect of LCD screen by displaying full color, pure white, and pure black to
check whether the screen displays colors properly. During the test, press
to continue to the next test,
while press
to exit the test.
Test Voice: The device automatically tests whether the voice files stored in the device are complete and
the voice quality is good. During the test, press
to continue to the next test, while press to exit the
test.
Test Keyboard: To test all keys to see if every key functions properly. Press any key in the Keyboard
testing interface; if the pressed key is consistent with the key sign shown on the screen, then the key
functions properly. Press
or to exit the test.
Test Fingerprint Sensor: To test the fingerprint sensor by pressing fingerprint to check if the collected
fingerprint image is clear. When pressing fingerprint on the sensor, the image will be displayed on the
screen. Press
or to exit the test.
Cam testing: To test if the camera functions properly by checking the photos taken are clear for use.
Press or to exit the test.
Test Clock RTC: To test the Real-Time Clock. The device tests whether the clock works properly and
accurately by checking the stopwatch. Press
to start counting time, and press again to stop counting,
to see if the stopwatch counts time accurately. Press
to exit the test.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
