ZKTeco ProCapture-T User Manual

30 ProCapture-T & PRoRF-T User Manual
Delete All Data: To delete all user information, fingerprints and access records etc.
Delete Admin Role: To make all Administrators become Normal Users.
Delete Access Control: To delete all access data.
Delete User Photo
: To delete all user photos in the device (only products possessing Photo ID
function display this optional). For details of uploading user photo, please refer to 16.3 Image Uploading
Rule.)
Delete Wallpaper: To delete selected or all wallpapers in the device.
Operating Procedure:
1． Select “Delete Wallpaper” and press
to enter.
2． Press
or to switch displayed wallpaper, select “Delete Selected Picture” and press to
delete the selected picture, or select “Delete All Pictures” and press
to delete all pictures.
Delete Screen Savers: To delete selected or all screen savers in the device. (For details of uploading
screen savers, please refer to 16.3 Image Uploading Rule.)
Delete Backup Data: To delete all backup data.
9.2 Data Backup
To backup the business data, or configuration data to the device or U disk.
Backup to USB Disk (Before backing up data to a USB disk, please insert a USB disk into the USB port of
the device):

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm