Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
5
2 Main Menu
When the device is in standby mode, press to enter the Main Menu.
User Mgt.: Basic information of registered users, including user ID, user name, user role, fingerprint,
badge ★ (ID and
RFID S50/S70 IC Card (13.56 MHz) are optional), password, user photo★ (only products
possessing Photo ID function display this optional) and access control role.
User Role: To set user roles for accessing into the menu and changing settings.
Comm.: To set the related parameters of the communication between the device and PC, including
ethernet parameters such as IP address etc., serial Comm, PC connection,ADMS and Wiegand settings.
System: To set related parameters of the system and upgrade firmware, including setting date & time,
access logs, fingerprint parameters and resetting to factory settings.
Personalize: This includes interface display, voice and bell settings.
Data Mgt.: delete access records, delete all data, delete admin role, delete screen savers and backup,
restore data.
Access Control: To set the parameters of the control lock and access control devices, including
parameters of access control, time rules, holidays, combined unlocking, and anti-passback.
USB Manager: To transfer data such as user data and access records from the USB disk to the supporting
software or other devices.
Attendance Search: To search for the records stored in the device after successful verification.
Autotest: To automatically test different module’s functions, including the LCD, voice, keyboard,
fingerprint sensor, camera and clock RTC test.
System Info: To check device capacity, device and firmware information.
To Next Page
Loading...
