ZKTeco ProCapture-T User Manual

6 ProCapture-T & PRoRF-T User Manual
3 Date/Time Settings
In the initial interface, press
> System > Date Time to enter the date/time setting interface. It
includes setting date, time, 24-hour clock, date format and daylight saving time.
When resetting to factory settings, the date format can be restored (YYYY-MM-DD).
 Remarks: When resetting to factory settings, the device’s date/time will not be restored (if the
date/time is set to 18:30 on January 1, 2020, after settings are reset, the date/time will stay at 18:30 on
January 1, 2020.
3.1 Daylight Saving Time
DST, which is also called Daylight Saving Time, is a system adjusting local time in order to save energy.
The time adopted during the set dates is called "DST". Usually, the time will be one hour forward in
summer. This enables users to sleep or get up earlier, and also reduce device's lighting to save power. In
autumn, the time will resume the standard time. Regulations are different in different countries. At
present, nearly 110 countries adopt DST.
To meet the demand of DST, a special option can be customized. Make the time one hour forward at XX
(hour) XX (day) XX (month), and make the time one hour backward at XX (hour) XX (day) XX (month)
Press
> System > Date Time > Daylight Saving Time, then press to enable Daylight Saving Time.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm