ZKTeco ProCapture-T User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
7
Daylight Saving Mode: Daylight Saving Time Mode, by date/time mode and by week/day mode for
selection.
Daylight Saving Setup: Set date/time or week/day of the Daylight Saving Time according to the
selection in Daylight Saving Mode.
How to set the Daylight Saving Time?
For example, adjust the clock forward one hour at 08: 00 on April 1 and backward one hour at 08: 00 on
October 1 (the system turns back to the original time).

By date/time mode:
 By week/date mode:
Remarks:
1. If the month when DST starts is later than that when DST ends, DST spans two different years. For
example, the DST start time is 2014-9-1 4:00 and the DST end time is 2015-4-1 4:00.
2. Assume that the week /day mode is selected in [Daylight Saving Mode] and the DST starts from
Sunday of the sixth week of September in 2013. According to the calendar, September of 2014 does
not have six weeks but has five weeks. In this case, in 2014, DST starts at the corresponding time point
of the last Sunday of September.
Assume that the DST starts from Monday of the first week of September in 2014. According to the
calendar, the first week of September in 2015 does not have Monday. In this case, the DST starts from the
first Monday of September in 2015.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm