ZKTeco ProCapture-T - User Management; 4.1 Adding User

8 ProCapture-T & PRoRF-T User Manual
4 User Management
4.1 Adding User
Including adding super admin and normal user.
In the initial interface, press
> User Mgt. > New User to enter New User setting interface. Settings
include inputting User ID, choosing User Role (Normal User / Super Admin), registering Fingerprint and
Badge Number (ID and
RFID S50/S70 IC Card (13.56 MHz) are optional), setting Password, taking User
Photo  (only products possessing Photo ID function display this optional) and setting Access Control
Role.
Add a Super Admin: Choose “Super Admin” in [User Role], who is allowed to operate all the functions
on the menu.
As shown below, the user with User ID 1 is a super admin
Add a Normal User: Choose “Normal User” in [User Role]. When the Super Admin is set, Normal Users
can only use fingerprint, password or card for verification; when the Super Admin is not yet set, Normal
Users can operate all functions on the menu.
Password: 1 to 8 digits of password is accepted.
Remarks:
1.
The device automatically allocates user ID for users in sequence, but user can set it manually as well.