ZKTeco ProCapture-T User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
17
6.5 Wiegand Setup
In the initial interface, press
> Comm. > Wiegand Setup to enter the Wiegand Setup setting
interface.
6.5.1 Wiegand Input
Wiegand Input connector supports card reader, or connects the device as a master device to another
device (slave device), forming a master/slave system.
Select “Wiegadn Input” and
press
to enter
Set parameters in “Wiegand Input” interface
Wiegand Format: User can choose among the following built-in Wiegand formats: Wiegand 26,
Wiegand 26a, Wiegand 34, Wiegand 34a, Wiegand 36, Wiegand 36a, Wiegand 37, Wiegand 37a and
Wiegand 50.
Pulse Width (us):
The width of pulse sent by Wiegand card reader. The default value is 100 microseconds,
which can be adjusted within the range of 20 to 100 microseconds.
Pulse Interval (us): The default value is 1000 microseconds, which can be adjusted within the range of 200
to 20000 microseconds.
ID Type: Input content included in Wiegand input signal. User ID or Badge Number can be chosen.
Definitions of Wiegand Formats:
Wiegand Format Definition

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm