Name: ZKTeco ProCapture-T
Brand: ZKTeco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

18 ProCapture-T & PRoRF-T User Manual

Wiegand26 ECCCCCCCCCCCCCCCCCCCCCCCCO

Consists of 26 bits of binary code. The 1

bit is the even parity bit of the

to 13

bits, while the 26

bit is the odd parity bit of the 14

to 25

bits. The 2

to 25

bits are the card number.

Wiegand26a ESSSSSSSSCCCCCCCCCCCCCCCCO

Consists of 26 bits of binary code. The 1

bit is the even parity bit of the

to 13

bits, while the 26

bit is the odd parity bit of the 14

to 25

bits. The 2

to 9

bits are the site code, while the 10

to 25

bits are the

card number.

Wiegand34 ECCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCO

Consists of 34 bits of binary code. The 1

bit is the even parity bit of the

to 17

bits, while the 34

bit is the odd parity bit of the 18

to 33

bits. The 2

to 25

bits are the card number.

Wiegand34a ESSSSSSSSCCCCCCCCCCCCCCCCCCCCCCCCO

Consists of 34 bits of binary code. The 1

bit is the even parity bit of the

to 17

bits, while the 34

bit is the odd parity bit of the 18

to 33

bits. The 2

to 9

bits are the site code, while the 10

to 25

bits are the

card number.

Wiegand36 OFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCMME

Consists of 36 bits of binary code. The 1

bit is the odd parity bit of the

to 18

bits, while the 36

bit is the even parity bit of the 19

to 35

bits. The 2

to 17

bits are the device code, the 18

to 33

bits are the

card number, and the 34

to 35

bits are the manufacturer code.

Wiegand36a EFFFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCO

Consists of 36 bits of binary code. The 1

bit is the even parity bit of the

to 18

bits, while the 36

bit is the odd parity bit of the 19

to 35

bits. The 2

to 19

bits are the device code, and the 20

to 35

bits are

the card number.

Wiegand37 OMMMMSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCE

Questions and Answers:

Need help?

Do you have a question about the ZKTeco ProCapture-T and is the answer not in the manual?

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz