ZKTeco ProCapture-T User Manual

42 ProCapture-T & PRoRF-T User Manual
11 USB Manager
User data, user portrait, access records and other data can be exported to relevant software for
processing through a USB disk, or import user data to the device by using a USB disk.
 Remarks: Before uploading/downloading data from/to the USB disk, insert the USB disk into the
USB slot first.
11.1 USB Download
In the initial interface, press
> USB Manager > Download to enter the USB Download interface.
Download access records: To download access records in specified time period into USB disk.
User Data: To download all user information and fingerprints from the device into USB disk.
User Portrait
: To download all user photos from the device into a USB disk (only products possessing
Photo ID function display this optional).
Attendance Photo: To download attendance photos in specified time period from the device into USB
disk.
Blacklist Photo: To download blacklisted photos (photos taken after failed verifications) in specified time
period from the device into USB disk.

ZKTeco ProCapture-T Specifications

General

Type	Intelligent access control reader
Product color	Black
Cards capacity	10000 cards
RFID frequency	0.125 MHz
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
PC connection	RS-485/Wiegand
Supported network protocols	TCP/IP
Viewing angle, horizontal	120 °
Display type	TFT-LCD
Display diagonal	2.4 \
Operating temperature (T-T)	-10 - 50 °C
DC voltage range	12 - 12 V
Power consumption	500 mA
Flash memory	0.256 GB
Internal memory	0.128 GB
Processor frequency	1200 MHz

Weight and Dimensions

Depth	35 mm
Width	87 mm
Height	195.5 mm