ZKTeco SpeedFace-V5L Series User Manual

SpeedFace-V5L Series User Manual
Page | 104 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
The SpeedFace-V5L and the indoor station to achieve video intercom there are two modes, respectively,
the LAN and SIP server.
Local Area Network Use
Set the IP address on the indoor station, Tap Menu > Advanced > Network > 1. Network > 1. IPv4.
Note: In LAN, the IP addresses of the indoor station and the SpeedFace-V5L must be in the same network
segment.
 Directly Enter the IP Address of the Indoor Station
Once the indoor station is configured with the network, the video intercom function can be realized by tap
the icon on the SpeedFace-V5L screen and entering the IP address of the indoor station in the jumping
interface.

ZKTeco SpeedFace-V5L Series Specifications

General

Face Capacity	50, 000
Card Capacity	50, 000
Display	5-inch Touch Screen
Operating System	Linux
Certifications	CE, FCC
Communication	TCP/IP, Wi-Fi
Power Supply	DC 12V/3A
Operating Temperature	-10°C to 45°C
Operating Humidity	20% to 80%
Standard Functions	Anti-Passback, Tamper Alarm
Access Control Interface	Exit Button, Door Sensor
Face Recognition Speed	< 1s
Face Recognition Distance	0.3m-2m
Processor	1GHz Dual-Core CPU
Camera	2MP Binocular Camera