SpeedFace-V5L Series User Manual
Page | 79 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Combined Verification
Access groups are arranged into different door-unlocking combinations to achieve multiple verifications
and strengthen security.
In a door-unlocking combination, the range of the combined number N is 0 ≤ N ≤ 5 and the number of
members N may all belong to one access group or may belong to five different access groups.
Tap Combined Verification on the Access Control interface to configure the combined verification
setting.
On the combined verification interface, tap the Door-unlock combination to be set, and tap the up and
down arrows to input the combination number, and then press OK.
For Example:
If the Door-unlock combination 1 is set as (01 03 05 06 08). It indicates that the unlock combination
1 consists of 5 people and all the 5 individuals are from 5 groups, namely, AC Group 1, AC Group 3, AC
Group 5, AC Group 6, and AC Group 8, respectively.
If the Door-unlock combination 2 is set as (02 02 04 04 07). It indicates that the unlock combination
2 consists of 5 people; the first two are from AC Group 2, the next two are from AC Group 4, and the
last person is from AC Group 7.
If the Door-unlock combination 3 is set as (09 09 09 09 09). It indicates that there are 5 people in
this combination; all of which are from AC Group 9.
If the Door-unlock combination 4 is set as (03 05 08 00 00). It indicates that the unlock combination
4 consists of only three people. The first person is from AC Group 3, the second person is from AC
Group 5, and the third person is from AC Group 8.
Note: To delete the door-unlock combination, set all Door-unlock combinations to 0.
To Next Page
Loading...
Need help?
General
