SpeedFace-V5L Series User Manual
Page | 48 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Wireless Network
The device provides a Wi-Fi module, which can be built-in within the device mould or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can
toggle the Wi-Fi to disable button.
Tap Wi-Fi Settings on the Comm. Settings interface to configure the WiFi settings.
WIFI is enabled in the Device by default. Toggle on button to enable or disable WIFI.
Once the Wi-Fi is turned on, the device will search for the available WIFI within the network range.
Tap on the appropriate WiFi name from the available list, and input the correct password in the password
interface, and then tap Connect to WIFI (OK).
To Next Page
Loading...
