SpeedFace-V5L Series User Manual
Page | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Face Registration
Try to keep the face in the centre of the screen during registration. Please face the camera and stay still
during face registration. The screen looks like this:
Correct Face Registration and Authentication Method
Recommendation for Registering a Face
When registering a face, maintain a distance of 40cm to 80cm between the device and the face.
Be careful to keep your facial expression natural and not to change. (smiling face, drawn face, wink,
etc.)
If you do not follow the instructions on the screen, the face registration may take longer or may fail.
Be careful not to cover the eyes or eyebrows.
Do not wear hats, masks, sunglasses or eyeglasses.
Be careful not to display two faces on the screen. Register one person at a time.
It is recommended for a user wearing glasses to register both faces with and without glasses.
Recommendation for Authenticating a Face
Ensure that the face appears inside the guideline displayed on the screen of the device.
Sometimes, authentication may fail due to the change in the wearing glasses then the one used while
registration. In such a case, you may require authenticating your face with the previously worn glasses.
If your face was registered without glasses, you should authenticate your face without glasses further.
To Next Page
Loading...
Need help?
General
