SpeedFace-V5L Series User Manual
Page | 68 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Wallpaper
It helps to select the main screen wallpaper according to the user preference.
Language
It helps to select the language of the device.
Menu Screen
Timeout (s)
When there is no operation, and the time exceeds the set value, the device
automatically goes back to the initial interface.
The function can either be disabled or set the required value between 60 and
99999 seconds.
Idle Time To
Slide Show (s)
When there is no operation, and the time exceeds the set value, a slide show is
displayed. The function can be disabled, or you may set the value between 3 and
999 seconds.
Slide Show
Interval (s)
It is the time interval in switching between different slide show pictures. The
function can be disabled, or you may set the interval between 3 and 999 seconds.
Idle Time To
Sleep (m)
If the sleep mode is activated, and when there is no operation in the device, then
the device will enter standby mode.
This function can be disabled or set a value within 1-999 minutes.
Main Screen Style
The style of the main screen can be selected according to the user preference.
Voice Settings
Tap Voice on the Personalize interface to configure the voice settings.
Function Description
Function Name Description
Voice Prompt
Select whether to enable voice prompts during operating.
Touch Prompt
Select whether to enable keypad sounds.
Volume
Adjust the volume of the device; valid value: 0-100.
To Next Page
Loading...
Need help?
General
