ZKTeco SpeedFace-V5L Series User Manual

SpeedFace-V5L Series User Manual
Page | 94 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Add Device on the Software
Add the device by searching. The process is as follows:
1. Click Access Control > Device > Search Device to open the Search interface in the software.
2. Click Search, and it will prompt “Searching……”.
3. After searching, the list and total number of access controllers will be displayed.
4. Click Add in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level
from each dropdown and click OK to add the device.

ZKTeco SpeedFace-V5L Series Specifications

General

Face Capacity	50, 000
Card Capacity	50, 000
Display	5-inch Touch Screen
Operating System	Linux
Certifications	CE, FCC
Communication	TCP/IP, Wi-Fi
Power Supply	DC 12V/3A
Operating Temperature	-10°C to 45°C
Operating Humidity	20% to 80%
Standard Functions	Anti-Passback, Tamper Alarm
Access Control Interface	Exit Button, Door Sensor
Face Recognition Speed	< 1s
Face Recognition Distance	0.3m-2m
Processor	1GHz Dual-Core CPU
Camera	2MP Binocular Camera