SpeedFace-V5L Series User Manual
Page | 8 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Data Security Statement
ZKTeco, as a smart product supplier, may also need to know and collect some of your personal information
in order to better assist you in using ZKTeco's goods and services, and will treat your privacy carefully by
developing a Privacy Policy.
Please read and understand completely all the privacy protection policy regulations and key points that
appear on the device before using ZKTeco products.
As a product user, you must comply with applicable laws and regulations related to personal data
protection when collecting, storing, and using personal data, including but not limited to taking protective
measures for personal data, such as performing reasonable rights management for devices, strengthening
the physical security of device application scenarios, and so on.
Safety Measures
The below instructions intend to ensure that the user can use the product correctly to avoid danger or
property loss. The following precautions are to keep users safe and prevent any damage. Please read
carefully before installation.
Noncompliance with instructions could lead to product damage or physical injury (may even cause
death).
1. Read, follow, and retain instructions - All safety and operational instructions must be properly
read and followed before bringing the device into service.
2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions.
3. Accessories - Use only manufacturer-recommended or product-sold accessories. Please do not use
any other components other than manufacturer suggested materials.
4. Precautions for the installation – Do not place this device on an unstable stand or frame. It may
fall and cause serious injury to persons and damage to the device.
5. Service - Do not try to service this unit yourself. Opening or removing covers may expose you to
hazardous voltages or other hazards.
6. Damage requiring service - Disconnect the system from the Mains AC or DC power source and
refer service personnel under the following conditions:
When cord or connection control is affected.
When the liquid spilled, or an item dropped into the system.
If exposed to water or due to inclement weather (rain, snow, and more.
If the system is not operating normally, under operating instructions.
Just change controls defined in operating instructions. Improper adjustment of the controls may
result in damage and involve a qualified technician to return the device to normal operation.
And do not connect multiple devices to one power adapter as adapter overload can cause over-
To Next Page
Loading...
Need help?
General
